Various methods are used to make soap in the melt and pour way, this article solely focuses on the cold process. Handmade cold process making soap can be one of the most innovative hobbies. Moreover, because this process focuses on the goodness of homemade soap, you can personalize all you want.

The main feature that makes the cold soap-making different is that no external heat is required here.

Keynotes for Homemade cold process making soap

Homemade soap making can seem difficult as it involves using lye. Although lye requires caution, once you get comfortable there’s no going back. Most of the ingredients can be found in local health stores.

Ensure that you’re wearing protective gloves and eyewear while handling lye.

You would need an accurate digital scale as measuring cold process soap ingredients by volume isn’t enough. You will need to measure the ingredients to the mark using a digital scale.

Homemade cold process making soap: The steps

Find a recipe that you like and run it through a lye calculator

You can get your hands on a range of various soap recipes online. So, when you’ve found the one, you have to run it through the lye calculator. This is because different oils require different amounts of lye to saponify.

If the lye to fat ratio isn’t balanced, you might end up with a soft too harsh or too soft. The most commonly used ratio is 5-6% superfat for most recipes.

Get all the ingredients and safety gear

Although lye can be hard to find sometimes, you can probably get some from a good hardware store or order online. The best way to check if the quality is good is by shaking the bottle. If you hear lumps rattling around, the lye is past its peak and won’t give expected results.

You can get the other ingredients online from justthink.com.au. They are known for their natural products known to improve health. You can also get the essential oils online or from local health food stores. Ensure that you have got a set of heat and chemical-proof gloves and eye gear.

Prepare the mould for your cold process soap

You’ve to line your mould with oil paper, freezer paper or parchment paper. You can either buy readymade silicon moulds or use a homemade mould. You can also use heavy-duty cardboard boxes or silicone bread loaf pan for your soap.

Weigh the water and lye

Measure the required water according to your recipe in a stainless steel container. Measure the lye in a plastic cup using a digital scale.

Mix lye and water

Place the water container in a sink and slowly pour the lye into it. Be cautious while doing this step as the temperature goes above 200°F. Avoid inhaling direct fumes and keep the windows of the room open.

Once done, weigh and heat the fats and oil, monitor the temperature of the mixture and blend it well. Now, pour the soap into the mould, cover the mould to create insulation, take it out and slice it. Viola! Your Handmade cold process making soap is ready.